TFL Cabinet Door Specifications & Material Fine Print

TFL Door builds cabinet doors and drawer fronts from thermally fused laminate made by ten manufacturers. Each one has its own page of technical data: substrate, thickness, panel sizes, wear, fire, formaldehyde emissions, certifications, warranty and care. Every value is taken from that manufacturer's own website or data sheet and cited beside it.

Door construction (3/4" thickness, matched edgeband, stile and rail widths, MR-50 substrate, boring) is on specifying TFL cabinet doors. The pages below cover the raw panel each manufacturer supplies. Sources were accessed 2026-11-13. Gaps are marked Not published by manufacturer rather than filled in.

Manufacturer technical data

WilsonartWilsonart® Thermally Fused Laminate (TFL) Panels, part of the Wilsonart Coordinated Surfaces program (TFL, HPL, edgeband and cabinet door/molding in matching designs). View Wilsonart specs
FormicaFormica® Brand TFL designs, manufactured and distributed by ARAUCO under Formica Group’s TFL program. View Formica specs
EGGEREGGER Decorative TFL boards on EGGER raw particleboard or MDF. The North American range includes TSCA 187, TSCA ULEF and Flammex flame-retardant versions. View EGGER specs
ARAUCOARAUCO PRISM® TFL panels, laminated on ARAUCO particleboard and MDF in North America. View ARAUCO specs
KronospanKronospan Kronodesign® TFL panels on particleboard (PB) or MDF, sold in the U.S. by Kronospan USA. View Kronospan specs
ALVICALVIC SYNCRON melamine-faced particleboard: decorative paper on both sides of a recycled-content particleboard. View ALVIC specs
UniboardUniboard® TFL panels: melamine-saturated paper thermally fused to particleboard or MDF, produced in Québec. View Uniboard specs
RoseburgRoseburg Duramine® thermally fused laminate on Roseburg composite substrates. Source is Roseburg’s 2020 Duramine brochure; see the availability note. View Roseburg specs
PanolamPanolam® Thermofused Laminate (TFL) panels on industrial particleboard or MDF, coordinated with Pionite® HPL. View Panolam specs
FunderFunder TFL decorative panels (also called thermofused melamine, TFM) on particleboard, MDF or plywood cores, plus Kora TFL Veneer. View Funder specs

Quick comparison: published wear resistance

Wear resistance as each manufacturer states it. Test methods differ (NEMA LD 3 cycles vs. ISO 4586-2 revolutions or classes), so compare within the same method only. Full context and citations are on each manufacturer's page.

ManufacturerPublished wear value
WilsonartNEMA: Solid colors 400 cycles; woodgrains 125; abstracts 125. ISO 4586-2: ≥400 solids, ≥125 woodgrain, ≥125 abstracts.
FormicaNot published by manufacturer (Formica) for TFL in the documents reviewed.
EGGERClass 1 (print decors including pearlescent): IP <50 revolutions. Class 3A (print decors with overlay, solid decors <120 g/m²): ≥150. Class 3B (solid decors ≥120 g/m²): ≥250.
ARAUCOSolid colors >150 cycles / Class 3; woodgrains & abstract designs ≥50, <150 cycles / Class 2.
KronospanListed features: UV stability, easy to maintain, stain resistant. Numeric wear/abrasion values: Not published by manufacturer.
ALVICAbrasion resistance: Class 1 (EN 14323).
Uniboard400 cycles (solid colours); 125 cycles (prints).
Roseburg550–700 cycles (solids); 100 cycles (wood grains).
PanolamSolid colors 700–900 cycles; printed patterns 125–200 cycles.
FunderSolid color 600 cycles; woodgrain 200 cycles (typical).

More for the trade

See TFL doors for architects, interior designers and contractors, compare door materials, or browse color options.

Get an instant TFL door quote Order TFL samples

Questions? Call or text (205) 222-6866. Built in Birmingham, Alabama. Shipped nationwide.