EGGER TFL Technical Specifications
EGGER Decorative TFL boards on EGGER raw particleboard or MDF. The North American range includes TSCA 187, TSCA ULEF and Flammex flame-retardant versions. This is the material fine print for architects and specifiers. Every value comes from EGGER's own published documents and is cited beside the value.
How to read this page. The values describe the raw TFL panel as EGGER publishes it, not a finished TFL Door cabinet door. For door construction (3/4" thickness, matched edgeband, stile and rail widths, MR-50 option), see specifying TFL cabinet doors. Where EGGER does not publish a value, it is marked Not published by manufacturer. Manufacturers revise data sheets, so confirm against the current sheet before final specification. Sources were accessed 2026-11-13.
EGGER TFL panel data
| Property | Published value | Source (accessed) |
|---|---|---|
| Product lines | EGGER Decorative TFL Particleboards TSCA 187; Decorative TFL Particleboards TSCA ULEF; Decorative Flammex Flame Retardant TFL Particleboards TSCA 187; Decorative MDF; Decorative Multilayer ML (Feelwood). | [E1] 2026-11-13 [E5] 2026-11-13 [E6] 2026-11-13 [E7] 2026-11-13 |
| Substrate / core | EGGER raw particleboard and EGGER raw MDF. The TSCA 187 particleboard is UF- and UMF-bonded. | [E1] 2026-11-13 [E3] 2026-11-13 |
| Thickness | Thickness tolerance, standard boards: ±0.012" (Class 1) or +0.020/−0.012" (Class 3A/3B) for boards up to 3/4"; ±0.020" above 3/4". Multilayer boards (total thickness): ±0.020". Raw PB TSCA 187 is made in 1/4"–1-1/8". Feelwood multilayer adds 0.6 mm (0.3 mm per side), so 3/4" nominal measures 49/64" (19.6 mm). | [E1] 2026-11-13 [E2] 2026-11-13 [E5] 2026-11-13 |
| Panel sizes | Length/width tolerance ±0.20" (commercial sizes), ±0.10" (pre-cut). Specific sheet sizes: Not published by manufacturer in the TDS (EGGER publishes a product availability guide online). | [E1] 2026-11-13 |
| Density | Not published by manufacturer in the TDS. Raw PB TSCA 187 (>1/2"–3/4"): MOR 1,600 psi; MOE 246,600 psi; internal bond 52 psi; linear expansion 0.40%. | [E2] 2026-11-13 |
| Designs / finishes | EGGER Decorative Collection decor and texture combinations, matched across TFL, edgebanding and laminates through EGGER’s decor match system. Feelwood textures are multilayer on both sides. | [E5] 2026-11-13 |
| Wear resistance (ISO 4586-2) | Class 1 (print decors including pearlescent): IP <50 revolutions. Class 3A (print decors with overlay, solid decors <120 g/m²): ≥150. Class 3B (solid decors ≥120 g/m²): ≥250. | [E1] 2026-11-13 |
| Other surface performance | Scratch (ISO 4586-2): ≥2 (≥1 for pearlescent decors). Staining (ISO 4586-2 Method A): groups 1 & 2 ≥3. Light fastness: ≥4 grey scale. Surface defects: ≤2 mm²/m² spot-type, ≤20 mm/m² hair-like. Edge defects (EN 14322): ≤10 mm. Flatness (>19/32"): ≤0.08". | [E1] 2026-11-13 |
| Fire rating | Decorative TFL on EGGER raw particleboard: CAN/ULC-S102 FSR 115–155, SDI 55–140; ASTM E84 Class C. Decorative MDF: ASTM E84 Class C. Flammex: ASTM E84 Class A, in compliance with CAN/ULC-S102. | [E1] 2026-11-13 [E7] 2026-11-13 |
| Formaldehyde / emissions | EPA TSCA Title VI certified, CARB 2 certified. The ULEF version has third-party ULEF certification. The TSCA 187 EHD states that version does not fulfill ULEF requirements. | [E1] 2026-11-13 [E2] 2026-11-13 [E3] 2026-11-13 [E4] 2026-11-13 [E6] 2026-11-13 |
| Certifications | Verified by ISO 38200:2018 statements; other third-party certified qualities (e.g. PEFC) available on request. EPD: “This product currently has no EPD.” FSC / GREENGUARD / HPD: Not published by manufacturer in the documents reviewed. | [E3] 2026-11-13 [E4] 2026-11-13 |
| LEED / green building | The EHDs give LEED v4.1, WELL v2 and BREEAM v6.0 credit tables. The ULEF product is listed as “qualified for extra LEED points based on ULEF specification”. | [E3] 2026-11-13 [E4] 2026-11-13 [E6] 2026-11-13 |
| Sustainability facts | TSCA 187: 94% material from the circular economy (83% pre-consumer, 13% post-consumer recycling material); 89% renewable resources. | [E5] 2026-11-13 |
| Moisture resistance | Applications: interior surfaces in dry conditions. Moisture-resistant core: Not published by manufacturer in the documents reviewed. | [E5] 2026-11-13 [E6] 2026-11-13 |
| Heat / service limits | Maximum 122°F (50°C) for long, continuous heat exposure; above that, cracks may occur. Leave clearance around heat sources. | [E1] 2026-11-13 |
| Storage | Store flat and dry in a closed, frost-protected building, preferably 68°F (20°C) and 65% RH. Condition final products to the expected room climate before installation. | [E1] 2026-11-13 |
| Color tolerance | Slight (level 4) deviation, or moderate (level 3) for mother-of-pearl decors, is permissible versus the master sample per EN 14322. | [E1] 2026-11-13 |
| Warranty | Not published by manufacturer. The TDS states it is not a guarantee of product properties. | [E1] 2026-11-13 |
| Care / cleaning | EGGER publishes “Cleaning and care recommendations for EGGER surfaces” and “EGGER surface resistance to disinfectants” on the product page. Contents were not transcribed here. | [E5] 2026-11-13 |
EGGER source documents
- [E1] EGGER Technical data sheet – EGGER Decorative TFL Boards (Rev. 17, approved 09-Apr-2026). Published by EGGER Wood Products, LLC (Linwood, NC). Accessed 2026-11-13.
- [E2] EGGER Technical Data Sheet – Raw Particleboards PB TSCA 187 (17-Jul-25). Published by EGGER Wood Products, LLC (Linwood, NC). Accessed 2026-11-13.
- [E3] EGGER Environmental & Health Data Sheet – Decorative TFL Particleboards TSCA 187. Published by EGGER Wood Products, LLC (Linwood, NC). Accessed 2026-11-13.
- [E4] EGGER Environmental & Health Data Sheet – Decorative TFL Particleboards TSCA ULEF 167. Published by EGGER Wood Products, LLC (Linwood, NC). Accessed 2026-11-13.
- [E5] EGGER product page – Decorative TFL Particleboards TSCA 187. Published by EGGER Wood Products, LLC (Linwood, NC). Accessed 2026-11-13.
- [E6] EGGER product page – Decorative TFL Particleboards TSCA ULEF. Published by EGGER Wood Products, LLC (Linwood, NC). Accessed 2026-11-13.
- [E7] EGGER product page – Decorative Flammex Flame Retardant TFL Particleboards TSCA 187. Published by EGGER Wood Products, LLC (Linwood, NC). Accessed 2026-11-13.
Order EGGER TFL cabinet doors
TFL Door builds 1-piece slab, 3-piece slab and 5-piece shaker doors and drawer fronts in EGGER decors. See EGGER cabinet doors, door styles and the specifications for every manufacturer.
Get an instant TFL door quote
Order TFL samples
Questions? Call or text (205) 222-6866. Built in Birmingham, Alabama. Shipped nationwide.